That is, a gas compressor that uses nitrogen as a compressed gas. The nitrogen compressor has the characteristics of simple structure, stable operation, low noise, convenient operation, safety and reliability. Mainly used in chemical industry waste gas recovery, pressurization and other operating processes.
A nitrogen compressor is a gas compressor that uses nitrogen as a compressed gas.
The nitrogen compressor has the characteristics of simple structure, stable operation, low noise, convenient operation, safety and reliability.
Mainly used in chemical industry waste gas recovery, pressurization and other operating processes.
The helium compressor is a driving unit of a cryopump system or other refrigeration unit, and is used to supply helium to the cryopump or other refrigeration unit.
When the compressor is started, the current of the motor will be 5-6 times higher than the rated current, which will not only affect the service life of the motor and consume more power. When the system is designed, there will be a certain margin in the motor selection. The speed of the motor is fixed, but in actual use, sometimes it is necessary to run at a lower or higher speed, so it is often necessary to carry out frequency conversion transformation. The inverter can realize the soft start of the motor, achieve the purpose of energy-saving speed regulation by changing the input voltage frequency of the device, and can provide the device with protection functions such as overcurrent, overvoltage, and overload.
Compressor packaging and shipping can be handled in accordance with the contract. Compressors imported in large quantities are generally packed in cardboard boxes and then shipped in containers. The compressor should be firmly fixed in the packing box, and there should be measures against moisture and shock. Do not invert during storage and transportation, and store in a well-ventilated warehouse. The relative humidity cannot exceed 80%, and no corrosive gas can be present.
As long as the compressor is in use, the sealing rubber plug can be pulled out. If the plug is found to be loose or loose during storage and transportation, it should be inspected and stored in time.
Machine model: HW-28.6 / 6 compressed gas: nitrogen flow: 28.6m3 / min
Intake pressure: Normal pressure Exhaust pressure: 0.6MPa